ELOIK Fusion splicer,eloik fusion machine,alk-88,ALK-88A fusion splicer

    Eloik Communication Equipment Technology Co.,Ltd

    Home > News > Industry News

    Mr. Locke optical fiber welding machine tells you how simple it operation

    Mr. Locke optical fiber welding machine tells you how simple it operation. Optical fiber welding machine is the first step is to install a welding protective sleeve, and then after stripping and splitting of optical fiber producing section, placing it to the correct position of the welding, welding need to keep both the end face of the fiber with a suitable coaxial position, and then to guard the optical fiber and shut the door. Then the operator will fiber moved to the right place, ready to weld and ignition. After welding, some welding machine can weld contact briefly test. Then optical fiber removed, slide the protective fuse contact position, to heat protective sleeve, produce hot shrinkage, protect the cable. Operators need to spend a lot of time for optical fiber position confirmation and protection of casing treatment.The company specializing in the production and sales of products such as optical fiber fusionsplicer. Welcome to inquire. This website source http://www.eloik.org

    Powered by MetInfo 5.3.17 ©2008-2017 www.metinfo.cn