ELOIK Fusion splicer,eloik fusion machine,alk-88,ALK-88A fusion splicer

    Eloik Communication Equipment Technology Co.,Ltd

    Home > News > Company News

    Optical fiber welding machine of the location of the optical fiber cutting knife

    Optical fiber welding machine of the location of the optical fiber cutting knife. Discharge welding, the optical fiber cutting knife adjustment steps are as follows: 1, confirm the fiber cutting knife device has a blade sliding plate at the front end, open the platen size. 2, with peel fiber pliers strip optical fiber coating layer, the reserved long naked degrees for 30 to 40 mm, dip in with alcohol cotton wool or cotton paper fiber, then wipe off the fiber. Use absorbent cotton or cotton paper to clean once, don't use the same cotton wool or cotton paper to wipe the second (note: please use the purity is more than 99% alcohol). 3, visual optical fiber cutting knife edge coating layer on the cutter rod (12 ~ 20 cm) on the appropriate scale, left hand to press the fiber into the guide groove, require bare fiber straight on the left and right rubber mat. 4, close the small plate, pressure plate, driving device with blade slider, ? make knife。The company specializing in the production and sales of products such as optical fiber fusionsplicer. Welcome to inquire. This website source http://www.eloik.org

    Powered by MetInfo 5.3.17 ©2008-2017 www.metinfo.cn